POWER

Weeks after a massive magnitude 9.0 earthquake and subsequent 14-meter-high tsunami devastated Fukushima Prefecture in northeastern Japan, workers from the Tokyo Electric Power Co. (TEPCO) were still struggling to regain control of four severely damaged reactors at the six-unit Fukushima Daiichi nuclear power plant.

In 1983, OSHA published its Hazard Communication (HAZCOM) Standard, which requires that the hazards of all chemicals used in the workplace be communicated to employees so that responsible protective measures can be taken. Today, HAZCOM remains near the top of the list of most frequently violated OSHA standards that result in a citation. The 1917 Halifax Explosion, one of the world’s largest nonnuclear explosions, testifies to what can happen when you don’t have—or don’t follow—an effective HAZCOM program.

The People’s Republic of China’s Congress approved a much-anticipated draft of the country’s 12th Five-Year Plan (2011–2015) on March 14. Along with key objectives that included boosting its gross domestic product (GDP) by 7% annually on average, the country for the first time in a five-year plan established targets to tackle climate change. It plans to reduce carbon dioxide emissions per unit of GDP by 17% from 2010 levels by 2015 and to reduce energy consumption per unit of GDP by 16% from 2010 levels by 2015.

The challenges of using Powder River Basin (PRB) coal are as significant as the rewards. The subbituminous coal contains lower amounts of sulfur dioxide than bituminous coal but can be prone to combustible dust explosions if it is not properly managed. To eliminate such hazards, plant personnel need to establish best practices for the safe operation and maintenance of PRB coal-handling and -storage systems based on best available technologies.

Subsidized by the Dutch government, a number of Dutch utilities, the European Membrane Institute at the University of Twente, and Dutch consulting firm KEMA have, for over a decade, been testing membrane technology that promises to directly convert water vapor from power and other industrial plants’ flue gases into drinking water. The technology could provide a new source of large volumes of potable water.

The Roosevelt Island Tidal Energy (RITE) pilot project used six full-scale hydrokinetic turbines to capture the power of river tides and currents and convert it into electricity. Located in New York City’s East River, it is the first and only grid-connected tidal array project in the world. RITE project developers are seeking approval to install up to 30 additional turbines in the near future.

Competition among offshore wind turbine vendors vying for market share went into overdrive in the first three months of 2011 as several key players announced gigantic new turbine models.

In Part III of this three-part report, we look at plant- and fleet-level metrics used to determine compensation. As expected from this EUCG-sponsored benchmarking survey, there is broad use of quantifiable metrics to set portions of compensation, but the metrics selected vary substantially across the surveyed utilities. More surprising was the number of utilities that used no performance metrics as part of their employee compensation packages.

A major technical advance in hydroelectric dam safety was achieved this March as Alstom’s Chinese arm, the Tianjin Alstom Hydro Co. (TAH), delivered what it called “the world’s first self-closing electronic ring gate control system” to the Ahai hydropower project in China.

The new Wheelift Self-Propelled Modular Transporter increases safety in spent fuel cask transport and alignment for NUHOMS-type ISFSI installations by reducing worker exposure because only one person is needed to operate the transporter from between 30 feet and 50 feet away. The transporter’s omni-directional steering and 10-inch lift capability enables the same operator to perform […]

Researchers at Sandia National Laboratories say a project that focuses on supercritical carbon dioxide (CO₂) Brayton cycle turbines is moving to the demonstration stage.

Hamworthy Peabody Combustion’s new Q-jet Low NOx Burner Optimization Kit can be retrofitted to practically any existing burner, regardless of manufacturer, to increase efficiency and reduce maintenance. In addition, the Q-jet Kit eliminates the need to replace complete burner assemblies just to meet emissions requirements, saving time and money. A key feature is that the […]

Like most forms of generation, solar power has its disadvantages. Two cited most by critics of photovoltaic (PV) or concentrating solar power facilities are that they require large expanses of land and that solar cell fabrication and maintenance costs are high. Several companies have been assessing a new approach to tackling these factors: installing solar plants on water.

Valve-maker Conval announced that its popular Camseal zero-leakage ball valves now have forged bodies. These new forged ball valves are available in half-inch through 4-inch sizes with top entry, socket weld, butt weld, and flanged ends. Pressure classes range from ASME 900 through 4500. Camseal forged ball valves feature zero body leakage, zero seat leakage, zero seal […]

ABB, BHEL to Deliver $1.1B Multi-Terminal UHVDC Line in India. Zurich-based ABB and Indian state-owned company Bharat Heavy Electricals Ltd. (BHEL) said on March 23 that they had been selected by Power Grid Corp. of India Ltd. (PGCIL) to deliver an ultrahigh-voltage direct current (UHVDC) transmission system to convey hydropower from northeastern India to the […]

The electric power generation landscape in both America and the rest of the world is poised to undergo a fundamental transformation in the next several decades. Global energy consumption is projected to rise dramatically by 2035, and the methods by which we generate electricity and the fuels we choose to use will begin to change as well.

Many large utility-scale units with copper alloy condensers and feedwater heaters lose generating capacity when copper and copper oxide deposits develop on high-pressure (HP) steam turbine blading. It is not unusual for a 400-MW unit to lose 10% of its generating capacity over a six-month period when water treatment processes aren’t properly tuned to prevent copper transport in the steam and condensate systems. In fact, one utility reported that it lost 20 MW of capacity in one month because of such deposits. The financial implications of such deposits, particularly in power markets where plants are pushed to their generating limits, are tremendous.

Geologists drilling an exploratory well in Iceland’s Krafla volcano in search of supercritical geothermal resources in 2009 unexpectedly uncovered a new way to harness energy from deep within Earth’s crust. It involves accessing shallow bodies of molten rock, which the geologists say could likely be found elsewhere in Iceland and around the world, wherever young volcanic rocks occur.

Aberdeen, UK–based casing and completion technology specialist Deep Casing Tools launched the Turbocaser Express, what it calls the “first ever drill-through tool to ensure casing to target depth, allowing wells to be drilled as planned and enhancing integrity.” After reaming a casing to target depth, the Turbocaser Express has a unique, patented internal design that […]

Bayer in February brought online a pilot plant at Chempark Leverkusen, Germany, to recycle carbon dioxide (CO₂) scrubbed from the flue gas of a 1,000-MW RWE lignite-fired unit and convert it into a raw material and petroleum substitute for plastic manufacturing. The Bayer facility (Figure 4) essentially produces a chemical precursor into which CO₂ is incorporated and then processed into polyurethanes that are used for many everyday items.

Palmer Wahl Instruments Inc. has introduced a new line of digital pressure test gauges that includes the Palmer 3PC Auto Ranging Digital Pressure Test Gauge (shown here), which spans a pressure range of vacuum to 3,000 psi. Featuring an accuracy of 0.1%, and with the capacity to read nine different units of measure, the 3PC […]

Dutch energy consulting firm KEMA in February opened a new laboratory in Chalfont, Pa., to test and verify emerging utility-scale energy storage systems.

Kistler announced the North American market introduction of the Type 8763B, a miniature IEPE triaxial accelerometer with voltage output. The accelerometer offers simultaneous shock and vibration measurements on three mutually perpendicular axes with optional TEDS capabilities (per IEEE 1451.4) to meet high-performance requirements. Available in six unique models with measurement ranges from ±50 g to […]

China Inaugurates 660-kV DC Line. The China Power Grid Co. on Feb. 28 began transmitting power through a 660-kV direct current power transmission link that runs from northwest China’s Ningxia Hui Autonomous Region. Part of China’s west-east power transmission program, the 10.4 billion yuan (US$1.58 billion) project runs 1,333 kilometers through five provinces and regions […]

Ergodyne has launched the ProFlex 750 At-Heights Construction Glove. The glove delivers the comfort, durability, and protection required for climbing as well as the fit and dexterity needed to get the job done right in the world’s highest work zones, the company claims. Designed to reduce fatigue and discomfort while climbing, the 750 At-Heights Construction […]

This year’s series will focus on predictive maintenance (PdM), also known as condition-based maintenance.

Bobcat’s launch of the new 700 Series compact loaders adds three new models to the company’s family of new-generation loaders. The new loaders, all with vertical lift path design, offer several new features and enhancements that significantly extend the range of applications for compact loaders, Bobcats says. The 700 Series comprises a new skid-steer loader […]

Imagine this scenario: Two separate power plants experience a bowing problem greater than 18 mils with a steam-turbine rotor. The turbines are from the same manufacturer and several repair options are reviewed. Management at both plants selects an innovative approach involving removal of a substantial amount of material, which is replaced with weld overlay and then machined to correct diameters and centerline of the balance piston area. One plant’s insurance company covers the repair, the other plant’s doesn’t. Why?

The recent tensions in the Middle East and their impact on oil and gasoline prices remind us that the U.S. remains heavily dependent on foreign nations—some of them unstable—to meet many of our energy needs. Of course, oil will continue to have an important place in our energy mix, and expanding our domestic reserves makes sense.

In December 2010, the California Public Utilities Commission (CPUC) issued a decision with considerable fanfare that was intended to provide for the development of 1,000 MW of additional new renewable generation and provide California’s large investor-owned utilities (IOUs) with additional flexibility in complying with California’s Renewables Portfolio Standard (RPS) requirements. Unfortunately, it is likely to have the opposite effect.