O&M

BOEBLINGEN/HEIDENHEIM. The global technology company Voith Group and Moog Inc., both developers, manufacturers and suppliers of electric, hydraulic and hybrid drive solutions, have signed the contracts to form the joint venture HMS – Hybrid Motion Solutions GmbH based in Rutesheim on 29 April 2020. The joint venture provides for a strategic partnership to expand the […]

Hydrogen sulfide (H2S) gas is produced as a result of the microbial breakdown of organic materials in the absence of oxygen. It can be found in tanks, vaults, voids, and other confined spaces at industrial facilities including power plants. Besides being flammable and corrosive, H2S is also colorless and toxic, even in relatively low concentrations, […]

The power industry is undergoing massive transformational change with the emergence of renewables, battery storage, smart grids, Internet of Things, Industry 4.0, and more. Perhaps the timing is right to

Six times during the previous year the local utility supplying power to a large soap manufacturing plant in the Midwest suffered power outages, shutting down the plant’s production lines. Each time the lines

A boiler at the Renergia waste incineration plant in Perlen, Switzerland, was experiencing fireside corrosion. The shop-applied Alloy 625 weld overlay was showing signs of premature accelerated degradation

Power plants across the U.S. are working to minimize water use in order to comply with regulatory requirements and offset the growing cost of water. This article offers some important recommendations to manage

Magnetic flow meter technology is an optimal tool for wastewater processing, which can apply across power generating facilities that require water for cooling, steam, or other applications. In recent years the

Veolia Water Technologies’ low-temperature CoLD crystallizer technology can help coal power plants clean and recover water for reuse from the wastewater produced in wet scrubber systems. The innovative

Industrial fans are required for many power plants to operate, such as primary and secondary air fans, and induced draft fans. Understanding rotor dynamics is essential for reliable long-term fan operation. If

The safety of workers and equipment is an important consideration for power generation facilities, just as it is for other worksites. Power plants feature multiple pieces of complex machinery that can present

New partition brings added safety to control rooms during COVID-19 Pandemic  Minneapolis, Minn., April 30, 2020 – Winsted Control Room Solutions has unveiled new protective operator partitions. The new partitions were developed to bring a higher degree of safety to control room operators who are working through the COVID-19 pandemic. “Social distancing of six feet […]

April 28, 2020 — Flender, a leading global supplier of mechanical drives and a subsidiary of technology giant Siemens has announced plans for a expansion into Western Australia with a new state-of-the-art facility in Tonkin Highway Industrial Estate in Bayswater. The move comes as Flender continues to grow in the region and looks to expand […]

NORWALK, Conn. – In response to the need for greater worker protection during the COVID-19 pandemic, Triax Technologies, Inc., a leading provider of Internet of Things (IoT) worksite technology, today announced a new IoT system, Proximity TraceTM. The new solution provides proximity distancing alerts and contact tracing through a wearable device for workers across many […]

GE’s modernization of Bashkir Generation Company LLC’s TTP-2 Plant was completed on time, successfully and safely The project is expected to extend the maintenance interval by 25% at the TPP-2 plant—equivalent to approximately seven months GE’s localized support through its GE Energy Technology Center in Kaluga, including a SGT-800* spare parts warehouse, ensures availability of […]

The U.S. will attempt to regain its international standing as a world leader in nuclear energy through a three-pronged strategy that will essentially seek to strengthen the full domestic nuclear fuel cycle, possibly deny imports of nuclear fuel fabricated in Russia or China, and promote advanced reactor technologies. The strategy is outlined in the White […]

Dropsafe aids expansion into a wider variety of operating environments in multiple industries with XE & ME models Hong Kong, 23rd April – Global leader in Drops prevention, Dropsafe, has announced today that it is expanding its Barrier range to meet industry demand for robust Drops prevention solutions across all environments. Industries such as power generation and […]

One of the more memorable experiences from my years with GE’s renewable energy business was managing through a growth spurt in the wake of the 2008 financial crisis. From 2009–2012, U.S. installed wind capacity more than doubled, from 25 GW to 60 GW. The 14 GW installed in 2012 remain a single-year record. It is no […]

Suitable for all markets, the new digital smart positioner is appropriate for both control and on/off valve applications where enhanced diagnostics are required. It is ideal for highly critical applications in chemical/petrochemical processes. The YT-3700 and YT-3750 pneumatic smart positioners employ continuous monitoring and graphic display of valve position, set point target over time and […]

The U.S. nuclear power fleet last year achieved its lowest recorded average total generating costs in two decades—$30.42/MWh—though it ran at a record-high 93.4% average capacity factor. Total generating costs were 7.6% lower last year compared to the prior year, and have fallen nearly 32% since 2012. The numbers, highlighted in the Nuclear Energy Institute’s […]

It’s an unprecedented time for power generators worldwide. Utilities, grid operators, equipment manufacturers, and others working to keep the lights on know that a reliable supply of electricity is more important than ever as the world battles through the coronavirus pandemic. Dino Barajas, who recently joined the finance arm of DLA Piper in Los Angeles, […]

April 14, 2020 — Framatome signed a long-term service contract with the Taishan Nuclear Power Joint Venture Company Limited (TNPJVC) to support operations of two EPRs at the Taishan Nuclear Power Plant in China. This contract covers nuclear plant outage and maintenance work, including spare parts supply and engineering services for eight years. “This contract […]

In the face of widespread disruption driven by economic, regulatory and consumer forces, the energy sector is increasingly adopting digital technologies to transform the industry and bring it into the future. However, this move to modernization can unintentionally expose organizations to a range of new security threats that must be addressed. Digital Transformation—A Move to […]

It’s a rite of spring for the U.S. nuclear power industry. Plant operators schedule refueling outages, taking a reactor offline not only to refuel but also to perform repairs or other maintenance, and facility upgrades. It’s a task made more problematic this year, as social distancing and travel restrictions brought on by the COVID-19 pandemic […]

Company expedites rollout of and access to remote service tools and digital solutions across critical industry “During the COVID-19 crisis, governments and companies are having to make difficult choices, balancing people’s safety with economic livelihood. ABB is committed to supporting both: protect people, while helping businesses to stay operational during these challenging times,” said Peter […]

This moment is like nothing we’ve seen before in our lifetimes—impacting all our communities and disrupting lives everywhere. We are all concerned for our loved ones and our future. In our business, given the nature of what we do and, in turn, the basic but essential actions we help enable others to do—turn on the lights, refrigerate […]

UK-based bolt tensioning experts TensionPro has launched HYCOBOLT, an advanced hydraulic coupling bolt designed to deliver high performance torque transmission for critical load rotating shafts and couplings.HYCOBOLT is direct retrofit replacement to conventional fitted bolts on rotating machinery, providing significant benefits through both operational improvements in coupling performance and time saving during plant maintenance periods. Unlike conventional […]

Rotork recently installed and commissioned CVL linear control valve actuators at Didcot B Power Station, which supplies electricity to the National Grid. Rotork’s CVL1500 and CVL5000 actuators now control the supply of the spray water that is used as an emergency quench in the condensers should the steam turbine trip. The CVL actuator installation was […]

Mitsubishi Hitachi Power Systems, Ltd. (MHPS) has begun commissioning T-Point 2, its newest combined cycle power plant validation facility that will eventually host the company’s much-watched autonomous combined cycle power project. The 566-MW facility at Takasago Works in Hyogo Prefecture, Japan, will replace the iconic  T-Point facility, which MHPS’s parent company Mitsubishi Heavy Industries (MHI) completed […]

At Indeck, safety has always been one of our top priorities. Thus, our response to the COVID-19 pandemic has been to take proactive and necessary measures to protect the health and safety of our employees, our communities, and our customers. We will continue to serve our customers and ensure reliability throughout these unprecedented times. We […]

Ethernet bi-directional digital communication performance makes it possible for the field instruments and control devices to be a complete on-line system handling large data volumes at high speed  Yokogawa Corporation of America announces the release of its EtherNet/IP capability for the ADMAG Total Insight (TI) Magnetic Flowmeter. EtherNet/IP (Industrial Protocol) is an industrial network protocol […]