O&M

When the decision is made to retire a power plant, the work of getting there is just beginning. Maintaining safe and reliable generation requires strong leadership, clear communications, and heightened attention to operations and maintenance, staff morale, and post-shutdown plans.   For utilities and other generators facing the challenge of winding down operations at an […]

Minimizing the impact of electrical fires in power plants requires a combination of prevention, compartmentalization, detection, and suppression strategies. But first, everyone in a plant needs to understand the hazard. Fires at electric generating stations are rare—but not as rare as one might think. Loss history at hydroelectric facilities, for example, shows that fires involving […]

Transporting household and industrial waste as well as sewage sludge from a treatment plant to a power station can be a messy business. The utility company Linz AG found that a pipe conveyor system offered an optimal solution. The conveyor is not only highly energy efficient, but due to its closed design, it also allows […]

Studies and surveys have predicted a future shortage of skilled workers in the power industry for many years. Unfortunately, the future is here. When qualified workers are difficult to locate, some companies are finding that technology and service contracts allow them to do more with less. It’s no secret that the traditional power industry workforce […]

Wind turbine blades, gearboxes, and generators get most of the attention both within and beyond the power industry. The focus is often on increased capacity and blade lengths, as well as drive train premature failures. That’s natural, because those rotating blades are the most visible part of a wind project. However, successful operation of a […]

In order to comply with the Clean Air Act and subsequent regulations covering emissions, coal-fired utilities have installed multiple pollution control devices. Understanding key operating aspects of this equipment can help you avoid costly maintenance activities and forced shutdowns. Since the passage of the Clean Air Act in 1970, the regulatory environment for control of […]

A facility’s steam turbine ranks at, or at least near, the top of the list of vital power plant equipment. Without it, the thermal energy in pressurized steam can not be converted to rotary motion, which is

It’s no surprise that the Palo Verde Nuclear Generating Station led the nation in electrical generation in 2014—it has done that for 23 consecutive years—but with a total output of 32.3 million MWh, it even bested its own previous record set in 2012. The Palo Verde plant is located about 45 miles west of Phoenix, […]

Nuclear power station water storage tanks, located above ground or underground, are constructed of aluminum, stainless steel, or carbon steel. All have naturally occurring electro-chemical processes that can eventually deteriorate the metal, resulting in leaks. Defects that develop on the underside of tank floors are particularly difficult to detect and measure. The Nuclear Energy Institute […]

The Occupational Safety and Health Administration requires certain incidents to be recorded and reported, which generates a set of statistics that many companies use to gauge safety performance. However, other metrics may be better predictors. The Occupational Safety and Health Administration (OSHA) requires all employers with more than 10 employees, and whose establishments are not […]