safety

Power plants are inherently dangerous. Although safety is taken very seriously at most facilities, every year workers around the world are killed on the job by electrocution, falls, explosions, fires, and

Centrifugal pumps are one of the most popular types of pumps used both domestically and in industrial settings. There are various designs of centrifugal pumps (Figure 3), and they all work in a similar manner

It’s no secret that high-radiation areas are scattered throughout nuclear power plant facilities. The challenge is getting work done in those areas while keeping exposure to workers as low as possible. On

By many indicators, working in the power sector today is safer than it’s ever been. In 2014, the U.S. Occupational Safety and Health Administration (OSHA) found that utilities had a lower fatal work injury

Southern Co.’s Plant Scherer was chosen as the 2017 Powder River Basin Coal Users’ Group Plant of the Year based on a rigorous selection criteria, including safety, fire protection, and risk reduction

“Personal protective equipment (PPE) is inconvenient and uncomfortable, and this will only take a second. Besides, I’ve done this before, and it’s been fine every time. Will skipping PPE once really

A lot of different methods are available to encourage compliance with company policies and regulations, but some are more effective than others. One that has worked well for GE and its customers inspires

An intrinsically motivated safety culture does not usually emerge fully formed. Decisions and actions affecting behaviors are often linked to entrenched attitudes and beliefs within companies. Commitment and

Scaffolding typically ranks near the top of the U.S. Occupational Safety and Health Administration’s most-frequently cited standards. However, developing a strong safety culture and implementing an effective

The renewable revolution has been a catalyst for the wind energy market during recent years, with the global wind market growing at an incredible pace. It’s estimated that over 1.1 million people work in the

Nine workers were killed and two others were injured when a platform collapsed at a power plant under construction in Guangdong Province, China. The accident happened at about 8 a.m. local time on March 25 at the No. 7 Thermal Power Plant located in the provincial capital Guangzhou, according to Xinhua (the official news agency […]

W. CONSHOHOCKEN, Pa., March 27, 2017—A new ASTM International guide responds to a decades-long need to enhance safety surrounding protective coating systems at nuclear power plants. The new standard (soon to be published as D8104, Guide for Determining Coating Qualification Test Data Applicability) was developed by ASTM International’s committee on protective coating and lining work […]

An email written by the team leader of an ongoing Nuclear Regulatory Commission (NRC) inspection being conducted at the Pilgrim nuclear power plant suggested that the facility’s staff were “overwhelmed by just trying to run the station.” The wide-ranging NRC inspection began on Nov. 28. It is the third and largest inspection conducted as part […]

Nine people, including the chairman and chief engineer of the Fengcheng power plant, have been arrested following a scaffold collapse that killed 74 construction workers on November 24. The scaffold platform had been erected to facilitate work on a cooling tower that was being constructed at the plant located in Yichun City, Jiangxi Province. According […]

For all its record-breaking achievements for speed, innovation, and efficiency, the 3,960-MW Sasan Ultra Mega Power Project should have been a POWER Top Plant. But the unique project has been plagued by serious setbacks—including loss of life—that show how perilous the plant construction journey can be. A decade ago, India was suffering a power crisis […]

Construction on Belarus’s first nuclear power plant, being built by Russian state firm Rosatom in Ostrovets near the Lithuanian border, was halted after a construction mishap in July that is only now coming to light. Exactly what happened at the construction site on July 10 is unclear, but according to Rosatom, the plant’s reactor vessel […]

JENKINSVILLE, S.C.–(BUSINESS WIRE)–This week Westinghouse Electric Company completed the placement of two modules that are part of the innovative safety systems of the AP1000® Unit 2 currently under construction at the V.C. Summer Nuclear Station. The AP1000 plant safety systems rely on the laws of nature including gravity, natural circulation and condensation. The plant design […]

Power generators have always had to make afetyome changes as each new generation enters the sector, but today’s new workers are bringing with them attitudes and skills that challenge traditional plant management, for good and ill. Here’s what some companies and plants are doing to make the best use of younger workers while getting them […]

Broadly put, today’s power plant operations are a mix of automated operations and manual or procedural steps. A plant may have hundreds of control loops, interlocks, permissives, and safety systems. In

Human workers are imperfect, which is why there’s no magic bullet that will give you a safe workplace. But new research on human behavior and how that translates into safety attitudes is helping some in the power industry get beyond the traditional platitudes. Safety first. Safety is no accident. Be aware—Take care. Those and others […]

Seven workers have reportedly died from an April 20 incident at Adani Power’s coal-fired 4.6-GW Mundra power plant in Gujarat, India, that involved a pipeline hot water release. The accident occurred at about 11:15 a.m. on April 20 as Unit 4, one of the ultra mega power plant’s nine 660-MW units, was being restarted after […]

It’s been five years since the Great Tohoku Earthquake and tsunami prompted a crisis at the Fukushima Daiichi nuclear plant in Japan, but the world’s nuclear power sector is still lurching from its aftershocks. The Crisis at Daiichi Endures Five years ago, nearly a day after the 3-minute, 9.0-magnitude Great Tohoku Earthquake struck northeastern Japan—and unleashed […]

Coal dust combustion events injured employees and damaged equipment at Laramie River Station in May 2013. Any dust-filled facility could consider implementing some of the plant’s corrective actions to reduce the risk of experiencing a similar incident. When Laramie River Station (LRS), near Wheatland, Wyo., was built nearly 35 years ago, it was state-of-the-art. Constructed […]

I’ve got some good news and some bad news. The good news is that, according to the U.S. Bureau of Labor Statistics, the number of occupational fatalities resulting from exposure to electricity has decreased steadily during the past 10 years (Figure 1). The bad news is that 141 people died on the job in the […]

Standards and regulations may change, but the danger associated with arc flash hazards remains. Analyzing potential incident energy correctly and understanding what personal protection equipment is required can help workers stay safe and avoid painful, or even life-threatening, injuries. The Occupational Safety and Health Administration (OSHA) and the National Fire Protection Association (NFPA) have both […]

Many of the dangers existing at conventional power plants also threaten personnel in the wind and solar energy sectors. All workers can benefit by reviewing lessons learned and implementing corrective actions to improve health and safety performance. The expanding wind and solar energy sectors are not immune to industrial hazards affecting all energy generation markets. […]

When the decision is made to retire a power plant, the work of getting there is just beginning. Maintaining safe and reliable generation requires strong leadership, clear communications, and heightened attention to operations and maintenance, staff morale, and post-shutdown plans.   For utilities and other generators facing the challenge of winding down operations at an […]

On July 2, the Nuclear Regulatory Commission (NRC) issued a “white” inspection finding to the Wolf Creek Generating Station in Burlington, Kan., in response to a deficiency identified during an emergency preparedness exercise conducted last year. Inspectors observed the biennial exercise on Nov. 5, 2013, to assess if the drill adequately tested elements of the […]