O&M

Houston, TX – EthosEnergy has been awarded a $8m, five year contract for full operations and maintenance (O&M) by Quantum Utility Generation for their Nevada Cogeneration Associates #2 plant in Nevada, US. The contract is for full care, custody and control operations, and maintenance including mobilization. This will be the fourth plant in the Quantum […]

Eskom operates 23 power stations in South Africa with a total capacity of more than 42 GW. It supplies about 95% of all the electricity used in the country. One of its coal-fired power stations was experiencing frequent boiler tube fatigue failures in the hopper section—the bottom part of the boiler—of all six units. The […]

U.S. wind power is becoming more widespread and costs are generally on the decline, but the sector is troubled by policy uncertainties, a new report from the Energy Department says.   After a lackluster year in 2013, wind power capacity additions in the U.S. rebounded nearly 8% in 2014, driven by recent improvements in the […]

Despite wind power’s going “mainstream,” original equipment manufacturers and end users struggle to pin down quality standards for ever-evolving wind turbine component technologies. As more utilities embrace wind power, the U.S. wind turbine market has expanded tremendously over the years. It has proliferated into numerous facilities that specialize in the roughly 8,000 component parts that […]

When the decision is made to retire a power plant, the work of getting there is just beginning. Maintaining safe and reliable generation requires strong leadership, clear communications, and heightened attention to operations and maintenance, staff morale, and post-shutdown plans.   For utilities and other generators facing the challenge of winding down operations at an […]

A facility’s steam turbine ranks at, or at least near, the top of the list of vital power plant equipment. Without it, the thermal energy in pressurized steam can not be converted to rotary motion, which is

Although industrial lubricants typically account for only 1% of plant operational costs (Figure 1), the lack of proper lubrication products, techniques, or applications can have a much more severe effect on

With the growing need for operational flexibility across the power industry, the combined-cycle gas turbine (CCGT) fleet is increasingly being subjected to load-following and cyclic operation. This change in

Fossil-fuel-based power generation plants with wet scrubbing systems use slurries of sorbents to remove sulfur dioxide from their emissions. These highly abrasive slurries accelerate wear on the expansion