GE Gas Power
-
O&M
Generator Maintenance: Preparing for the Bubble
If you were paying attention to the power industry during the early 2000s, you may remember a large spike in the U.S. gas turbine fleet at the time. The Energy Information Administration (EIA) reports that
-
Gas
Dania Beach Clean Energy Center: A Vital Power Resource for Southeast Florida
Florida Power & Light’s Dania Beach site has been producing power for Fort Lauderdale, Miami, and surrounding communities for more than 95 years. With the latest modernization project, it’s destined to
-
Gas
GE Invests Heavily in Improving Gas Turbine Repair Processes and Combustor Performance
On the east side of Greenville, South Carolina, sits a 413-acre site with more than one and a half million square feet of manufacturing space and another 70,000 square feet of labs. This is one of the locations where GE Gas Power is working to improve gas turbine technology and repair processes, among other things. […]
Tagged in: -
Press Releases
GE Announces New Options to Further Reduce Emissions on LM2500XPRESS* Aeroderivative Gas Turbines
Selective Catalytic Reduction (SCR) and Catalytic Oxidation Reduction (COR) systems are now available on GE LM2500XPRESS* aeroderivative gas turbines COR emissions control technologies were installed for the first time on GE’s LM2500XPRESS* units in Colorado to reduce emissions of carbon monoxide (CO) up to 50%. ATLANTA, GA — April 20, 2023 —GE (NYSE: GE) today […]
-
Press Releases
GE Wins New Order for TM2500 Technology Aiming to Deliver Much Needed Power and Accelerate Diesel-to-Gas Transition in Yemen
GE’s TM2500* aeroderivative gas turbine will help PetroMasila transition from diesel to natural gas-based power generation TM2500 – GE’s “power plant on wheels” with an ISO rating of 34 MW will be used to provide fast, flexible power to support oil exploration and extraction operations Ending gas flaring is central to the broader effort of […]
Tagged in: -
Gas
GE Will Supply Turbine and More for New Gas-Fired Plant in Greece
A new 840-MW natural gas-fired power plant in Greece will use equipment from General Electric (GE), with GE also providing services for the facility that is expected to come online in 2026. GE on March 20 announced the plant in Alexandroupolis will feature a 9HA.02 gas turbine, an STF-D650 steam turbine, and a W88 generator. […]
-
Press Releases
Using GE’s Aeroderivative Technology, Taiwan Power Company’s Tung Hsiao Power Plant Adds 180 Megawatts to Enhance Electricity System Reliability in Taiwan
GE supplied the LM2500XPRESS gas turbine generator sets with a total installed capacity of 180MW and the installation was completed within 10 months to improve the power supply reliability of Taiwan. Tung Hsiao Power Plant Renewal Project supports Taiwan’s Renewable Energy Development Act (REDA) energy policy that seeks to increase the gas-fired power ratio to […]
Tagged in: -
Press Releases
EnergyAustralia Modernizes Tallawarra A Power Plant to Support Energy Transition in Australia
Tallawarra A Power Plant Project marks the First HE Upgrade for the GT26 gas turbine ordered in Australia GE’s technology is expected to increase performance of the existing GT26 gas turbine aiming to add nearly 40 megawatts (MW) of power, supporting the expected energy demand following the closure of the coal fired 1,680-megawatt Liddell plant […]
-
Power
GE Releases New Option to Cut Emissions on Its Mobile Gas Turbines
GE Gas Power announced on Dec. 6 that it has deployed an “innovative technical solution” on four TM2500 aeroderivative gas turbines at the California Department of Water Resources’ (DWR’s) sites in Yuba City and Roseville, California (Figure 1). The solution reportedly reduced nitrogen oxide (NOx) and carbon monoxide (CO) emissions by more than 90%, surpassing […]
Tagged in: -
Press Releases
GE Expands Field Execution Best Practice “Live Outage” in Europe and in the Middle East
“Live Outage” approach utilizes digital solutions to improve the field execution experience with standardized procedures while maintaining safety best practices It was kicked off in the United States to help complete 7F outages with a substantial reduction in cycle time The best practice is now available in Europe and in the Middle East for GE […]
Tagged in: