gas turbine
-
Gas
GE Vernova Brings First 1.3-GW Block of Taiwan Gas-Fired Plant Online
GE Vernova said the first of three blocks of a major natural gas-fired power plant in Taiwan is now online. The company on July 7 said the first 1.3-GW unit of the Hsinta power station is operating, part of the facility’s transition from burning coal to using natural gas.
-
Gas
Direct Injection SCRs Lower Cost of NOx and CO Removal at Data Centers
In a 2023 report, McKinsey & Company projected 35 GW of new power will be needed for data centers in the U.S. by 2030. This forecast doubled the required power consumption from data servers, up from 17 GW in 2022. The explosive growth in data center infrastructure driven by investments in artificial intelligence (AI) is […]
-
Gas
GE Vernova Turbines Powering New 1.2-GW Gas-Fired Plant in Malaysia
An India-based company said it has started commercial operation of a 1,200-MW natural gas-fired power plant in Malaysia, part of a buildout of power generation capacity as that country’s population grows and its economy expands.
-
Gas
NRG, GE Vernova, Kiewit Have Plan to Build Four New Gas-Fired Power Plants
NRG Energy is joining with GE Vernova and Kiewit Corp. in a plan to build four new natural gas-fired power plants. The companies on Feb. 26 said the venture is designed to help supply the energy-intensive data center and artificial intelligence sector. “The accelerating demand for electricity in part due to GenAI [generative artificial intelligence] […]
Tagged in: -
Gas
China Brings 2.4-GW Gas-Fired Power Plant Online
China state-owned utility Guangdong Energy Group has started commercial operation of the Dongguan Ningzhou combined-cycle facility in Guangdong Province, China. GE Vernova, which supplied three 9HA.02 gas turbines for the project, on Oct. 24 announced the startup of the power station. The plant is among the largest gas-fired facilities in China. Officials said Dongguan Ningzhou […]
Tagged in: -
Gas
Simple Cycle, Combined Cycle, or a Hybrid Approach?
Simple cycle gas turbines provide efficiency levels of around 35% to 40%. Combined cycle units boost efficiency to 60% and beyond. But another option is emerging that combines the attributes of simple and combined cycle designs. This hybrid configuration uses a single power turbine expander and recycles exhaust heat back to the combustor to combine […]
-
Gas
GE Vernova Turbines Part of Upgrade at Japan Gas-Fired Power Plant
The Nanko Power Plant in Osaka, Japan, will be upgraded with new gas turbines from GE Vernova. The 1,800-MW station, which was commissioned in late 1990, is replacing three boilers and three steam turbines in an effort to increase the efficiency of the facility and reduce its emissions of carbon dioxide. GE Vernova on October […]
-
Hydrogen
Hydrogen Attracts Significant Investments to Support a Decarbonized Energy Economy
In late 2023, the U.S. Department of Energy (DOE) announced a $7 billion initiative to establish seven Regional Clean Hydrogen Hubs, aiming to scale the use of cost-effective clean hydrogen. This initiative comes as utilities face growing pressures from data centers and other industries that are demanding increasingly large amounts of reliable power. Hydrogen’s role […]
Tagged in: -
News
Experience Shows Wet Compression Is Safe to Use on Gas Turbines
Back in the early 2000s, some controversy emerged about the practice of spraying large amounts of fog directly into the compressor. Some claimed that this led to blade erosion, pitting, and scaling. So, is it safe to use wet compression on gas turbines by pumping water droplets into the compressor inlet? The answer is yes—provided […]
-
Gas
Original Approach to Fogging Regains Popularity
MeeFog’s very first installation of inlet air fogging was done at Harbor Cogen in Southern California in 1991 on a GE 7EA turbine where it continues to be used for power augmentation to this day (Figure 1). When it was installed, the fogging arrays were placed upstream of the air filters. Since that time, more […]