steam turbine

Many coal-fired power plants are being asked to ramp output up and down regularly, and often to levels less than units were originally designed to operate at. Implementing a Unit Flexibility and Asset

Power stations work under a contract to deliver energy to the grid, which is dependent on a consistent supply to ensure the local population and businesses can have a reliable supply of electricity. Short

Pilsen (07/12/2021) Doosan Škoda Power supplied Acciona with a steam turbine for the Avertas Energy facility in Australia. For the Pilsen-based steam turbine manufacturer, this project is the first contract on the Australian market and at the same time a steppingstone to other planned energy-from-waste projects in Australia, which are integrating the disposal of waste […]

Experience gained by a project team during a steam blowing operation for a combined cycle power project in Indonesia is described in this article. A specific challenge faced by the commissioning team is

East Rockingham utility-scale waste-to-energy (WtE) plant will be equipped with GE Steam Power’s 35-MWe turbine, part of GE’s renewable steam power technology portfolio The new WtE plant will convert non-recyclable waste into reliable and dependable electricity for the Australian grid while lowering the overall annual CO2 footprint by 300,000 tons – the equivalent of taking […]

Pilsen (26/10/2020) – To keep Doosan Škoda Power steam turbines running smoothly over the long-term, they need due care through regular inspections. This is the case with the steam turbine in the Sandvik 3 power plant in the Swedish city of Vaxjö, which Doosan Škoda Power engineers from Pilsen examined during an annual inspection visit. […]

Beyond the large units driving generators, small steam turbines are commonly used in parallel with electric motors to power important assets such as pumps. Keeping these smaller turbines properly maintained is essential for continued performance and reliability. Sulzer has a network of specialized facilities that are equipped to service these turbines as well as the […]

Pilsen (30/7/2020) – The Pilsen steam turbine manufacturer will supply two 50MW steam turbines, including other parts of additional technology and equipment, for one of the most modern power generating plant in Indonesia. The project site is located in a seismically active area and during the execution Doosan Škoda Power used its rich experience from […]

Pilsen (07/09/2020) – A pair of two cylinder DST-S10 condensation turbines with no reheating and with axial output have been operating since March 2020 at the Fadhili steam-gas power plant near the Jubail industrial city in Saudi Arabia on the Persian Gulf. The Fadhili steam-gas combined cycle plant, with a total capacity of 1,509 MW, […]

Pilsen (30/6/2020) – Pilsen-based steam turbine manufacturer Doosan Škoda Power is producing and installing a turbine set for the Rookery South Energy Recovery Facility in the British county of Bedfordshire. The turbine, which has an output of 67 MW including auxiliary equipment, will be operated by the Covanta and Veolia consortium. The turbine is scheduled […]