Burns & McDonnell

The Great Plains Power Station in Saskatchewan supports SaskPower’s effort to add generation capacity in support of the province’s rapidly growing industrial sector.

Advanced Distribution Management Systems (ADMS) and Distributed Energy Resource Management Systems (DERMS) are crucial grid management technologies in today’s modern power delivery system. ADMS integrates multiple utility operational systems into a unified control platform. It combines functions like outage management, supervisory control and data acquisition (SCADA) systems, and distribution automation (DA) to provide operators with […]

Engineering giant Burns & McDonnell has entered into an agreement with nuclear technology specialist BWXT Technologies to advance the design and development of the BWXT Advanced Nuclear Reactor (BANR). The microreactor project is an integral part of a contract with the Wyoming Energy Authority (WEA), which is assessing the viability of deploying small-scale nuclear reactors […]

The Morrow Repower Project, winner of POWER’s 2024 Reinvention Award, exemplified a strategic coal-to-gas conversion at a brownfield site that masterfully combined cutting-edge advanced technology with a

The energy workforce added nearly 300,000 jobs in 2022, increasing to more than 8.1 million total jobs at the end of the year, according to the Department of Energy’s (DOE’s) 2023 U.S. Energy and

During President Biden’s first year in office, his administration published a document titled “The Long-Term Strategy of the United States: Pathways to Net-Zero Greenhouse Gas Emissions by 2050.” The document says all viable routes to net-zero involve five key transformations. They are: Decarbonize electricity. Electrify end uses and switch to other clean fuels. Cut energy […]

The successful test of blending hydrogen with natural gas at a power plant in Michigan can be a model for the power generation industry. The use of hydrogen to fuel power generation is on the rise, with

A judge has ruled that construction of natural gas-fired power plant in Montana can resume, two months after the same judge ordered the project halted due to environmental concerns. The 175-MW Yellowstone County Generating Station, a $283 million facility sited near Laurel, has been dogged by legal actions after its air permit was challenged in […]

Company Now Mobilized on Six Additional Wisconsin Solar Sites Totaling 414 MWac of Capacity KANSAS CITY, Missouri — Burns & McDonnell has completed engineer-procure-construct (EPC) services for three Alliant Energy solar projects in Wisconsin. The projects are part of Alliant Energy’s Clean Energy Blueprint. These projects are now energized: Bear Creek — 50-MWac North Rock — 50-MWac […]

HOUSTON, Texas — Burns & McDonnell has been selected to provide engineer-procure-construct (EPC) services for project Texas Waves II, a 30-MW/30-MWh lithium-ion stand-alone battery energy storage system (BESS) in Scurry County, Texas. This battery system will make a meaningful contribution to grid reliability by providing the system operator a backup for lost generation. Additionally, the system […]

KANSAS CITY, Missouri — Burns & McDonnell recently completed construction of a 65-MWdc/50-MWac solar project at Vistra’s Brightside Solar Facility in Live Oak County, Texas. The project peaked with over 250 craft construction professionals on-site and was completed with zero safety recordables or lost time incidents. The site utilizes 440-watt First Solar thin-film modules in conjunction with […]

KANSAS CITY, Missouri (Jan. 19, 2022) — Burns & McDonnell has completed construction of three 10-MW/20-MWh lithium-ion battery energy storage systems (BESS) in West Texas. The three project sites were constructed, commissioned and put into operation in just five months, delivering the project on schedule amid a volatile supply chain and logistics market. The batteries […]

KANSAS CITY, Missouri, and WINNIPEG, Manitoba — To support clients in the critical infrastructure industries, Burns & McDonnell, a 100% employee-owned engineering, construction and architecture firm, and Librestream, the #1-rated provider of augmented reality (AR) and remote collaboration solutions, are collaborating to implement Librestream’s field-to-office collaboration and knowledge capture platform, Onsight. Onsight’s solution is device-agnostic […]

KANSAS CITY, Missouri — Burns & McDonnell is providing the engineering, procurement and construction (EPC) services for three Alliant Energy solar projects in Wisconsin. The projects include Bear Creek (50-MW/ac / 64-MW/dc), North Rock (50-MW/ac / 64-MW/dc), and Wood County (150-MW/ac / 198-MW/dc) and are part of the path to generating cleaner energy in the […]

KANSAS CITY, Missouri — Burns & McDonnell was selected by LG Energy Solution and Sustainable Environmental Renewable (SER) Capital Partners to provide engineer-procure-construct (EPC) services for three 10-megawatt/20 megawatt-hour lithium-ion, stand-alone battery energy storage systems. The three facilities are located in the West Texas region. The project consists of owner-provided LG Chem battery racks populated […]

Integrated Engineering and Construction Team Overcomes Many Challenges to Deliver Project on Time KANSAS CITY, Missouri (May 19, 2021) — Burns & McDonnell recently completed the construction of CenterPoint Energy’s utility-scale solar project. Located near Troy, Indiana, the 50-megawatt alternating current/65-megawatt direct current project will mark another step toward the utility’s goal of reducing operational […]

With the uptick of renewables to the grid a consistent topic of discussion turns to reliability of the source, the wind stops blowing, the sun stops shining and energy storage is quickly trying to make up the difference but is there another option? With many plant closures and the decline of fossil fuels is Hydrogen […]

VANCOUVER, Washington (March 15, 2021) — Burns & McDonnell, ranked No. 6 in Top 100 Design-Build Firms by Engineering News-Record (ENR), was selected by Bonneville Power Administration (BPA) to provide full-service engineering, architecture, environmental, permitting and construction solutions for a variety of power projects in Washington, Oregon and Idaho. As part of a five-year engineer-procure-construct […]

Power systems around the world are changing. Renewable energy, mainly in the form of wind and solar generation, is being added everywhere, while more traditional forms of power, such as coal-fired and nuclear generation, are being retired from the grid. Meanwhile, natural gas-fired generation has taken the lead role in facilitating the transition by providing […]

NEWTON, Massachusetts — Burns & McDonnell has been awarded the onshore Front End Engineering Design (FEED) for an offshore wind project with Mayflower Wind Energy LLC, a joint venture of Shell and Ocean Winds. Burns & McDonnell will also provide market engagement support for Mayflower’s project. Mayflower Wind won the rights to develop a lease […]

Construction Expected to Begin in 2021 for New 350-MW Combined-Cycle Facility KANSAS CITY, Missouri (Nov. 24, 2020) – SaskPower has selected Burns & McDonnell as the engineer-procure-construct (EPC) contractor for the new Great Plains Power Station. The new power facility will utilize highly efficient combined-cycle technology and clean-burning natural gas to provide up to 350 […]

WALLINGFORD, Connecticut — Bladt Industries A/S, a global leader in foundations and substations for offshore wind, and Burns & McDonnell, a 100% employee-owned engineering, construction, fabrication and architecture company based in the U.S., have announced a strategic alliance to bring together resources and experience and create local jobs along the Eastern Seaboard. Under the alliance, […]

Burns & McDonnell Delivering Utility’s First Turnkey Solar Project Evansville, Indiana (Oct. 27, 2020) — After successfully completing the engineering phase earlier this year, Burns & McDonnell will begin the construction of a 50-megawatt (MW) universal solar array in Troy, Indiana, to service electric customers in CenterPoint Energy’s Indiana Electric territory. When combined with the […]

Energy storage is becoming increasingly important to the power industry. Lithium-ion battery technology has been implemented in many locations, but flow batteries offer significant benefits in long-duration

KANSAS CITY, Missouri — Burns & McDonnell will serve as engineer-procure-construct (EPC) contractor for an extensive $134 million electrical control system upgrade and modernization project for the New York Power Authority’s 2,525-megawatt (MW) Robert Moses Niagara Power Plant. The control system project is a crucial component of a recently announced $1.1 billion Next Generation Niagara […]

Hundreds of coal-fired power plants are now retired or facing retirement in the near future, and utilities face a number of decisions. Are there commercial reuse options for the plant or the site itself? Are

Continues Partnership with Bonneville Power Administration in Providing Power to Growing Region THE DALLES, Oregon (Aug. 5, 2019) — Burns & McDonnell, an engineering, architecture and construction company, completed design and construction of the new Quenett Creek Substation to meet increasing power demand east of Portland, Oregon, in several areas served by the Bonneville Power […]

Schedule delays and cost overruns can pose problems for complex power plant construction and retrofit projects. Sound planning, accurate modeling, and good communication can lead to successful projects for all

The International Society for Mexico Energy (ISME), a non-profit energy business advocacy group formed three years ago in Houston, is launching its Mexico City chapter with an inaugural meeting to be held on Nov. 14 at the EGADE Business School in Mexico City. A meeting previously scheduled for late September was canceled due to the […]

Today’s demand for a smarter and more resilient power grid requires a leap forward in planning, analysis and assessment of everything from load flows, and reliability to operational efficiency, standards compliance and total lifecycle costs. As part of an effort to assist the T&D industry in meeting today’s demands, Burns & McDonnell has completed a […]