POWER

  The U.S. needs to add 600 to 800 billion cubic feet (Bcf) of natural gas storage capacity ASAP. Independent storage providers (ISPs) are the entities best equipped to build this needed infrastructure, but they continue to be restrained by anachronistic regulatory policies. The Federal Energy Regulatory Commission’s (FERC’s) December 2005 rule-making to modify its […]

CFB refractory repair; Upgrading conductivity monitoring; Low-cost maintenance of spinning reserve

Sliding-pressure, supercritical plants are all the rage. They generally include certain design features developed for markets and operating environments outside the U.S., where new coal-fired plants have been built in recent decades. U.S. market conditions are different, and considerable capital cost savings—with negligible operating cost differences—are possible if technology options are considered for the next wave of supercritical and ultra-supercritical steam plants.

In 2002, the Bush administration launched the Clean Coal Power Initiative in the hope that it would develop the missing technology piece of the cleaner energy puzzle. Four years and two rounds later, the U.S. electric power industry is seeing the first usable clean coal technologies emerge before its eyes.

Compared to most pieces of a power plant, refractory costs very little to install. Yet, if improperly manufactured, specified, stored, mixed, installed, cured, or dried, refractory may cause problems that can significantly decrease a plant’s operating efficiency and flexibility. Like Rodney Dangerfield, refractory design and installation deserve more respect.

The 35th birthday of the Environmental Protection Agency (EPA) passed last December 2 with little fanfare. EPA Administrator Stephen L. Johnson noted at the time that, "Over the last three and a half decades, through the use of innovative and collaborative approaches to environmental protection and a commitment to responsible stewardship, we have made remarkable […]

GE Energy’s latest "first" is in Turkey, where the Frame 6C gas turbine-generator—a younger cousin of the popular Frame 6B—has made its commercial debut. The turnkey 130-MW combined-cycle plant, called the GE206C, comprises two 40-MW Frame 6Cs, one GE steam turbine-generator, two heat-recovery steam generators, and a distributed control system. The gas-fired plant (Figure 1), […]

New Jersey’s gaming mecca is hosting one of the largest hybrid (solar-wind) power plants in the world (Figure 3). The Jersey-Atlantic Wind Farm, with 7.5 MW of wind capacity and 0.5 MW from photovoltaic (PV) cells, is expected to generate 20,000 MWh annually. That should be enough to power an adjacent wastewater treatment plant operated […]

The 130-MW Yuncán  hydroelectric plant (Figure 4) has come online in Peru about 210 miles northeast of Lima. To show his support for the project, Peruvian President Alejandro Toledo Manrique attended the inauguration ceremony. Yuncán  was commissioned just 21 months after the Peruvian government awarded a 30-year contract to operate the plant to EnerSur, the […]

The long-awaited 41st edition of Babcock & Wilcox Co.’s (B&W’s) Steam: Its Generation and Use (Figure 5) is now available for ordering on the company’s web site, www.babcock.com. The release of the book is worth noting by power plant engineers for two reasons: The tome is the world’s longest continually published (since 1875) engineering text, […]