Plant Design

The U.S. will attempt to regain its international standing as a world leader in nuclear energy through a three-pronged strategy that will essentially seek to strengthen the full domestic nuclear fuel cycle, possibly deny imports of nuclear fuel fabricated in Russia or China, and promote advanced reactor technologies. The strategy is outlined in the White […]

Dropsafe aids expansion into a wider variety of operating environments in multiple industries with XE & ME models Hong Kong, 23rd April – Global leader in Drops prevention, Dropsafe, has announced today that it is expanding its Barrier range to meet industry demand for robust Drops prevention solutions across all environments. Industries such as power generation and […]

A 22.7 MW flexible gas power plant delivered to Benndale, Mississippi, USA by the technology group Wärtsilä commenced commercial operations on 8 April, 2020, allowing electricity to be sold to the grid. The plant is owned by Cooperative Energy, a member owned electric cooperative, and was supplied by Wärtsilä on a full Engineering, Procurement & […]

The need to reduce carbon emissions is real. In 2018, the International Panel on Climate Change (IPCC) reported that global emissions would need to reach net-zero (or carbon-neutral) by 2050 to prevent severe climate change impacts. Electricity is a major contributor—electricity generation was responsible for approximately 33% of total CO2 emissions in the U.S. in […]

Siemens Energy completed “first fire” at Duke Energy’s Lincoln Combustion Turbine Station near Denver, North Carolina, on April 6. The accomplishment is a major milestone for the world’s first SGT6-9000HL gas turbine, confirming the engine and auxiliary systems, including the gas supply, lube oil system, control system, and startup systems, all work as designed. During […]

Rotork recently installed and commissioned CVL linear control valve actuators at Didcot B Power Station, which supplies electricity to the National Grid. Rotork’s CVL1500 and CVL5000 actuators now control the supply of the spray water that is used as an emergency quench in the condensers should the steam turbine trip. The CVL actuator installation was […]

Mitsubishi Hitachi Power Systems, Ltd. (MHPS) has begun commissioning T-Point 2, its newest combined cycle power plant validation facility that will eventually host the company’s much-watched autonomous combined cycle power project. The 566-MW facility at Takasago Works in Hyogo Prefecture, Japan, will replace the iconic  T-Point facility, which MHPS’s parent company Mitsubishi Heavy Industries (MHI) completed […]

Significant operating and economic benefits can be realized by replacing a poorly functioning or damaged oil-lubricated turbine guide bearing with a water-lubricated design (Figure 4), as part of a

The regenerative feedwater cycle of modern fossil and nuclear power plants normally includes four or five low-pressure, closed (tube surface-type) feedwater heaters (CFWHs). However, maximum efficiency can be

Liquid fuel storage requirements are based on fuel type, usage, and whether the fuel is “combustible” or “flammable” as assessed by the fuel flash point. This article presents information on applicable