Instrumentation & Controls

PITTSBURGH, Pennsylvania (August 3, 2020) — Emerson (NYSE: EMR) and Mitsubishi Hitachi Power Systems Americas (MHPS) are joining forces again to develop digital technologies, software and services to help utility customers drive operational excellence in North America. The companies will collaborate on digital solutions to optimize performance and reliability, enable predictive and AI-driven maintenance strategies, […]

The power generation industry is constantly evolving, with advanced technologies becoming more ubiquitous in power plants. Along with this evolution, instrumentation and control equipment continues to be key

ABB launches analytics software and services that combines operational data with engineering and IT data to deliver actionable intelligence The ABB Ability™ Genix Industrial Analytics and AI Suite is a scalable advanced analytics platform with pre-built, easy-to-use applications and services. It collects, contextualizes and converts operational, engineering and information technology data into actionable insights that […]

With the advantages of clean, renewable energy, wind power has become one of the fastest-growing energy sources and one of the most economical solutions for electricity generation. There are already 350,000 wind turbines installed globally, with more than 650,000 MW of  installed generation capacity. In light of climate change, demand continues to grow. However, to […]

An energy imbalance market (EIM) is a voluntary market that provides a sub-hourly economic dispatch of participating resources for balancing supply and demand every five minutes. One such market is the Western

The composition and heating values of fuel gas can vary from one moment in time to another. Using a Coriolis flow meter to obtain a mass flow measurement, rather than relying on a standard volume flow

In the competitive power market that exists today, utilities must utilize data to optimize their assets. With proper analysis, individual units, as well as fleets of plants, can balance operating costs

Some experts have predicted there will be as many as 50 billion connected devices in service by the end of this year. That number basically includes all of the equipment, sensors, and gadgets around the world that together make up the internet of things (IoT). But how are they all connected, what allows them to […]

Ancient Chinese fortune tellers used heated metal pokers to create cracks in bones or empty turtle shells. By reading the patterns in the cracks, they attempted to calm the unease that comes with the innate uncertainty of the world—especially the ancient world. They predicted the future and doled out advice that affected the fate and […]

Distributed control systems (DCSs) and programmable logic controllers (PLCs) have been commonplace in power plants for decades, but the technology has not been stagnant. Today’s systems are beginning to incorporate artificial intelligence (AI) and machine learning (ML) to take plant control to a whole new level. To get an insider’s perspective on how these systems […]

Houston, Texas – May 4, 2020 High-speed analysis enables live process and safety control, energy efficiency and yield improvements, as well as air emissions reductions Yokogawa Corporation of America has released the TDLS8100 probe-type Tunable Diode Laser Spectrometer (TDLS). Industrial process heating operations – fired heaters, boilers and furnaces – account for approximately 70% of […]

Six times during the previous year the local utility supplying power to a large soap manufacturing plant in the Midwest suffered power outages, shutting down the plant’s production lines. Each time the lines

Magnetic flow meter technology is an optimal tool for wastewater processing, which can apply across power generating facilities that require water for cooling, steam, or other applications. In recent years the

Suitable for all markets, the new digital smart positioner is appropriate for both control and on/off valve applications where enhanced diagnostics are required. It is ideal for highly critical applications in chemical/petrochemical processes. The YT-3700 and YT-3750 pneumatic smart positioners employ continuous monitoring and graphic display of valve position, set point target over time and […]

With the growth of distributed energy resources, including rooftop solar, wind turbines, battery energy storage systems, electric vehicles, and demand response technology, distributed energy resource management systems (DERMS) are becoming increasingly important for utilities. Brad Williams, vice president of Industry Strategy with Oracle Utilities was a guest on The POWER Podcast. He touched on a […]

The U.S. power sector is rallying together to implore state and local governments to treat sector-wide “mission-essential employees” with higher priority and ensure they have top-level access to testing and personal protective equipment (PPE) amid the intensifying COVID-19 pandemic. In a four-page April 2 white paper presumably addressing federal leadership, the Electricity Subsector Coordinating Council […]

Company expedites rollout of and access to remote service tools and digital solutions across critical industry “During the COVID-19 crisis, governments and companies are having to make difficult choices, balancing people’s safety with economic livelihood. ABB is committed to supporting both: protect people, while helping businesses to stay operational during these challenging times,” said Peter […]

Ethernet bi-directional digital communication performance makes it possible for the field instruments and control devices to be a complete on-line system handling large data volumes at high speed  Yokogawa Corporation of America announces the release of its EtherNet/IP capability for the ADMAG Total Insight (TI) Magnetic Flowmeter. EtherNet/IP (Industrial Protocol) is an industrial network protocol […]

Hydropower delivers a range of benefits to society and the environment. However, there are two major challenges that face hydroelectric power plant operators—efficient use of water and high availability. To

A lot must be reviewed prior to selecting the right fitting for power plant instrumentation applications. Among the choices are whether to use single- or double-ferrule designs; heat codes, lubrication, and

Houston, Texas (March 31, 2020) — Radix is developing a complex artificial intelligence platform for CEMIG’s (Companhia Energética de Minas Gerais SA) Customer Service Platform. The ‘R&D D0650’ project’s objective is to apply Omnichannel, Chatbot, Artificial Intelligence, and Big Data technologies to facilitate and improve customer communications while reducing expenses. CEMIG is one of the […]

The power industry and technology worlds are filled with acronyms. It’s often hard to know what they all mean. Mark Reisig, director of Product Marketing at Aras, was a guest on The POWER Podcast. He explained how digital technology is being utilized to bring products to market and track assets throughout their lifecycle. The process […]

Earlier this year, MITRE—a not-for-profit organization that works in the public interest across federal, state, and local governments, as well as with industry and academia—officially released the long-awaited industrial control systems (ICS) version of its popular ATT&CK knowledge base. ICS ATT&CK is the group’s response to the unique attack surface that industrial networks are trying […]

CHICAGO, March 9, 2020 /PRNewswire/ — Uptake and Flexco have partnered to launch Flexco Elevate™ Belt Conveyor Intelligence™, a real-time belt cleaner monitoring system that harnesses the power of predictive analytics to remotely gather critical insights that optimize belt conveyor productivity and heighten operational efficiencies. Flexco Elevate™ allows for the remote monitoring of belt cleaners […]

The terms “cloud” and “edge” are used frequently by tech-savvy power industry professionals, but what do they mean and how are they changing plant operations? To get an insider’s perspective, POWER posed the question to Akshay Patwal, strategic business manager with Siemens Energy. Patwal leads the development and commercialization of digital business transformation projects, using […]

ABB has won a 10.6 million euro order for ABB Ability™ digital products and services at DolWin5 (Epsilon), which will support Germany’s energy transition through reliable delivery of enough renewable energy to power about one million homes. ABB will enable the reliability, safety and security of the energy transmission from DolWin5 (Epsilon) by providing a […]

Is your company’s information technology (IT) department your friend or your enemy? Does it work with you to identify, evaluate, and select the best new digital technology to make your job easier and your

There is a near-global drive to replace carbon-based, polluting, resource-constrained energy sources with non-carbon renewables as the primary fuel for the electricity industry. Even traditional sources of