Hawaii’s Public Utilities Commission (PUC) last week denied a request by Hawaiian Electric Co. (HECO) to extend pilot testing for its advanced metering infrastructure (AMI) project to 5,000 more smart meter because of cost concerns. The move poses a major hurdle for the utility’s overall smart grid initiative.

Power plant operators, especially those located in countries with enforceable carbon emissions standards, are concerned about their CO₂ emissions. But for Helsingin Energia—which provides power, heating, and cooling for Helsinki, Finland’s 300,000 residents—the main concern is local warming, not global warming. In Helsinki, temperatures on midsummer afternoons only reach an average 21C, and for half the year daytime temperatures are below 10C.

Heise precision pressure instruments provide the high-accuracy measurements required for critical test, calibration, and process applications. The unique blend of product configurations includes the Heise 0.1% precision dial pressure gauge, the modular PTE-1 handheld calibrator, and high-accuracy digital pressure indicators and transducers. With ranges from 0.25 inches of water to 100,000 psi and accuracies to […]

Stacks at power generating stations may be low maintenance, but they are not no maintenance. The cost of preventing corrosion may be as little as $10,000, but the cost of repair or replacement could be many times that or even put your plant out of commission until the stack problem is corrected.

A proven solution for immediate and long-term job creation came from President Barack Obama and his administration earlier this year: investment in U.S. nuclear energy. Bulldozers in Georgia are already on the move and making preparations for expansion of a nuclear plant that has achieved several approvals, and long-awaited jobs in the skilled labor sector could materialize there within months.

In October of last year, the North American Electric Reliability Corp. (NERC) issued a study finding that maintaining electric reliability will require significant acceleration in the siting and construction of new transmission lines. The NERC study is indicative of growing concerns that changes to the current transmission planning process are necessary to maintain reliability and accommodate interconnection of the massive amounts of renewable resources expected to come online over the next 10 to 20 years.

Luminant used remnants of the ill-fated Twin Oaks and Forest Grove plants (which were mothballed more than 30 years ago) to build the new two-unit 1,600-MW Oak Grove Plant. Though outfitted with equipment from those old plants, Oak Grove also sports an array of modern air quality control equipment and is the nation’s first 100% lignite-fired plant to adopt selective catalytic reduction for NO_x control and activated carbon sorbent injection technology to remove mercury. For melding two different steam generators into a single project, adopting a unique and efficient “push-pull” fuel delivery system, assembling a tightly integrated team that completed the project on time and within budget, and for completing what was started almost four decades ago, Oak Grove Power Plant is awarded POWER magazine’s 2010 Plant of the Year award.

With commercial operation of Madison Unit 3, Cleco Power now claims bragging rights for owning the largest 100% petroleum coke–fired circulating fluidized bed power plant in North America. For using readily available fuel in an environmentally attractive manner, adopting fuel-flexible combustion technology, balancing the utility’s generation portfolio, and adopting an innovative fuel-handling system design, Madison Unit 3 is the winner of POWER’s 2010 Marmaduke Award for excellence in operation and maintenance. The award is named for Marmaduke Surfaceblow, the fictional marine engineer and plant troubleshooter par excellence.

A national R&D program has been under way to develop materials technology for constructing boilers and turbines capable of operating at advanced ultrasupercritical steam conditions in pulverized coal plants. The large-scale, multiyear, joint government/industry project seeks to increase the efficiency of power plants by increasing their steam conditions up to 1,400F (760C) at 5,000 psi (35 MPa). The ongoing project has already identified the materials and processes for successful operation at these higher steam conditions.

The amount of air leaking into the boiler envelope is difficult to estimate. Traditional methods of measuring oxygen at the furnace exit and economizer exit do not account for all types of air leakage. By using molar calculations and total airflow measurement, a good approximation of the total air in-leakage rates of a boiler can be quickly determined using station instruments.