Latest

China’s 12th Five-Year Plan calls for expanding the use of renewable energy in all forms throughout the country. From solar and wind to biomass gas and briquettes, China has a true “all of the above” renewable energy policy.

The de facto U.S. energy policy is to burn more gas, much of it produced using “fracking” technology. Huge volumes of low-priced natural gas have caused coal plant shutdowns, slowed renewable development, and undercut new nuclear plant development. Using more gas has also sent the nation’s carbon dioxide emissions into a downward spiral. Is the glut of natural gas too good to be true?

The U.S. Department of Energy contracted Shaw AREVA MOX Services LLC to design, construct, and operate a Mixed Oxide (MOX) Fuel Fabrication Facility (MFFF) at its Savannah River Site in South Carolina. The MFFF will convert depleted uranium and excess weapons-grade plutonium stockpiles, equivalent to approximately 17,000 nuclear weapons, into MOX fuel assemblies that will be used in U.S. nuclear power plants by 2018.

U.S. Environmental Protection Agency efforts to regulate mercury emissions from coal- and oil-fired power plants have spanned nearly two decades. In February of this year the agency promulgated the Mercury and Air Toxics Standards, but changes to the standards continue.

Retrofit projects are often very time-consuming, both for the engineers who must take numerous field measurements to produce drawings and for the contractor that must fabricate each assembly on site. A more cost-effective approach is to begin with a highly accurate set of as-built 3D models produced by laser scanning technology.

Coal used for power generation has been the cornerstone of economic development, social progress, and a higher quality of life around the globe and is now fueling the 21st-century economic miracle rapidly unfolding in China. Meanwhile, China is leading the world in coal-fired plant efficiency and the deployment of clean coal technologies.

Fauske & Associates LLC (FAI) recently patented a specialized pipe clamp to seat vibration-sensing equipment. A beam attached to the clamp protrudes through the pipe insulation. The beam is partially hollow and vented to promote cooling so that accelerometers can be installed on the tip of the beam outside the high-temperature and/or radiation area for […]

The new portable, nonmetallic Flex-I-Liner rotary peristaltic pump from Vanton Pump and Equipment Corp. evacuates drums and totes containing acids, caustics, salts, chlorides, and reagent grade chemicals, without corrosion of the pump or contamination of the fluid. The self-priming design has no seals to leak or valves to clog and can run dry for extended […]

Martin Engineering introduced a new family of electric screen vibrators for regular duty and hazardous environments. Designed to deliver up to 16,500 pounds of centrifugal force for efficient material separation, Martin screen vibrators are built to withstand the rigors of industrial applications and continuous use, and can run 24/7, as needed. With a traditional screen […]

Note on the Oconee Top Plant Some of our readers may have been confused by the wording of a press release about our November issue’s nuclear Top Plants, the table of contents blurb about Duke’s Oconee plant, or a sentence in the cover story about that plant. In the interest of brevity, it seems we […]