A systematic, performance-driven maintenance program for optimizing combustion can achieve great results. The challenge for an O&M staff is deciding which proven strategy and tactics for reducing NO_x and improving plant reliability to adapt and implement. The structured approach presented here has proven its worth at several plants that have wrestled with problems similar to yours.

The welds on superheater and reheater headers are arguably the most stressed parts of a modern steam plant. For that reason, it’s surprising that they also may be the most under-inspected. Cracks are rare, but they can be repaired if found early. One plant avoided a long forced outage to replace a reheater outlet header by using the correct condition assessments and welding techniques.

Part I of this three-part series (POWER, October 2006) explored the negative impacts of sulfur trioxide (SO₃) on the operation and maintenance of back-end plant equipment. In this issue, we list and quantify the likely and potential benefits of limiting the concentration of SO₃ in flue gas to 3 ppm at the entrance to the air heater. Part III—to appear in the April 2007 issue—will describe the characteristics of an optimal SO₃ removal technology and present the technical details and operating experience of one patented process that has worked successfully at a half-dozen plants for up to three years.

Environmentally benign disposal of coal combustion products/by-products (CCPs) such as flyash and bottom ash has been a problem since the first coal-fired power plant went on-line. In recent years, ways have been developed to recycle CCPs into useful commercial products like bricks and roadbase. This article describes an innovative State of Maryland program that is putting CCPs to yet another use: stabilizing abandoned mines to permanently sequester acids and harmful metals.

DOE walks the clean coal talk / For Swedish nuke, a case of mistaken identity / Siemens completes big CHP plant / E.ON bets big on coal / BP Solar expands Maryland plant / GE scores big turbine deals / PSNH switches from coal to wood / EPRI tests solid-state current limiter / POWER digest

Mandatory standards advance / To drain or not to drain / Practical aspects of burning landfill gas / Time management

U.S. demand for natural gas is projected to increase by more than 50% by 2020. Companies are building—and the public is opposing—receiving terminals on three coasts that would increase imports of liquefied natural gas. The pros and cons of "opening up" Alaska, coastal waters, and federal lands to drilling are still being debated. These politically […]

Forecasting the direction of the U.S. electric power industry for 2007, much less the distant future, is like defining a velocity vector; doing so requires a direction and speed to delineate progress. In this special report, POWER’s first stab at prognostication, the editors look at current industry indicators and draw conclusions based on their more than 100 years of experience. To borrow verbatim the title of basketball legend Charles Barkley’s book: I May Be Wrong but I Doubt It.

Following the money invested in projects is a viable way to compare growth trends for power projects using the four major generation types: coal, natural gas, nuclear, and renewable.

One expert has called it the "digital delta"—the seemingly endless challenges in refurbishing U.S. nuclear plants with digital instrumentation and controls. But it appears more like a deep ditch, where even those seeking to license new reactors could get stuck. Here’s the latest on the issues, experience, and results—plus recommendations for getting the industry out of the mud and back on the road.