POWER

Statkraft began operating its 4-kW prototype osmotic power plant at Tofte, just outside Oslo, Norway, in 2009. Now the firm reports that it is close to developing a large-scale plant. In June, Statkraft and Japanese materials manufacturer Nitto Denko/Hydranautics signed an agreement for the development and supply of membranes specifically designed for use in large-scale osmotic power plants.

New Pig Corp. launched the “PIG UV-Resistant Spill Kit in a 95-Gallon Container” as an easy oil-spill clean-up solution to large outdoor spills. Suitable for outdoor use and storage, the PIG UV-Resistant Spill Kit is nontransparent, providing superior protection of absorbent contents from UV degradation during long-term storage outdoors. The container includes enough PIG oil-absorbent […]

Two years after it laid the foundation stone, Germany’s E.ON on June 27 opened Hungary’s most efficient combined cycle gas turbine (CCGT) power plant (Figure 7). The €400 million ($573 million) plant in Gönyü has a capacity of 433 MW and an efficiency of over 59%, E.ON claims. Siemens supplied the main components: an SGT5-4000F gas turbine, an SST5-5000 steam turbine, an SGEN 5-3000W generator, and the entire electrical and instrument and control equipment. The natural gas–fired power plant is of single-shaft design with the main components arranged in a single driveline.

Danray Products introduced a line of heavy-duty lathe carriage (saddle) shields that are designed for manual lathes or similar machines. The shield attaches directly to the backside of the carriage, so it moves with the carriage as the work piece is being machined. This provides a barrier between individuals and the point-of-operation hazard. The shield […]

The Tide Turns for Marine Energy Devices. Siemens Energy recently secured a 10% stake in Marine Current Turbines, the UK company that owns SeaGen, a 1.2-MW tidal power plant, which was commissioned in 2008 on the Irish Sea. Marine Current Turbines is planning to build a larger, 8-MW plant off the coast of Scotland by […]

With the U.S. economy still struggling, few things are as important as having an abundant, reliable supply of energy to help drive our recovery. Many American families are hurting and our businesses are being challenged to create new jobs. That’s why federal, state, and local public policies must balance the need for broader economic prosperity, […]

This installment of the series continues our review of different conditioning-monitoring techniques commonly in use at power plants using any generation technology. In the May issue we began exploring specific PdM techniques with an examination of electrical surge comparison and motor-current signature analysis.

Eclipse Inc. introduced the TJSR v5 self-recuperative burner for direct-fired furnace heating applications. The advanced burner design combines a high-velocity flame with fuel-saving recuperation. A space-saving integral eductor pulls the furnace exhaust through an internal ceramic recuperator. The recuperator preheats the incoming combustion air to very high levels, which improves furnace operating efficiency to reduce […]

It may seem counterintuitive, but the strategic coupling of simple- and combined- cycle technologies with renewable generation could establish the conditions necessary for adding more renewable megawatts to transmission grids around the world.

Massachusetts-based Cabot Corp. recently introduced Enova, an aerogel that is a new high-performance thermal additive designed specifically for insulation coatings. Enova aerogel is designed for application to surfaces that are not already insulated but ideally should be. Cabot researchers have found that applying a 1-millimeter coating containing Enova aerogel to a 200C metal surface meets […]