Latest

E.ON in late June announced that it wants to shutter its Oskarshamn 2 reactor (Figure 1) in southeastern Sweden because it is unprofitable. The announcement is the latest in a string of early nuclear plant retirements from around the world. 1. Early retirement. The 638-MW Oskarshamn 2 nuclear reactor, built in 1974, is at risk […]

Steam turbine technology took a leap in June as Siemens revealed a 10-MW prototype that uses magnetic force to suspend a rotor weighing several tons. The innovation means that instead of needing hundreds of liters of oil for the bearings, the first-of-its-kind steam turbine only needs about three liters of oil (for the valve actuators […]

Dr. Ozgur Sahin, an associate professor of biological sciences and physics at Columbia University, who has helped develop a floating, piston-driven engine that generates power, most succinctly describes the

I’ve got some good news and some bad news. The good news is that, according to the U.S. Bureau of Labor Statistics, the number of occupational fatalities resulting from exposure to electricity has decreased steadily during the past 10 years (Figure 1). The bad news is that 141 people died on the job in the […]

Two of the most important elements in any construction or upgrade project are safety and speed of completion. While one way to increase safety is to eliminate hot work whenever possible, the reality is that welding is necessary for many tasks around a power plant. However, one area where welding may not always be required […]

Courtesy: SaskPower There was no debate among our editorial team when it came to selecting the most interesting and worthy project worldwide for this year’s top award. Boundary Dam Power Station Unit 3 is the world’s first operating coal-fired power plant to implement a full-scale post-combustion carbon capture and storage system. It did so more […]

Courtesy: Colorado Energy Nations, GDF SUEZ Energy NA, and Behrent Engineering POWER’s 2015 Reinvention Award (formerly known as the Marmaduke Award) goes to an industrial cogeneration plant that reinvented its largest unit for greater fuel and operating flexibility. This project is exemplary for the owner’s foresight, maximizing local engineering resources, a stellar safety record, and […]

It’s not often that a power plant upgrade improves both the environment and the bottom line. Needing to come up with a new source of cooling water for Polk Power Station, and faced with mostly expensive, environmentally questionable options, Tampa Electric came up with a solution that both secured the plant’s water supply for the […]

Looking to ensure reliable power for a critical facility—as well as move the needle on microgrid technology—Texas’s largest transmission company went all-in on a state-of-the-art demonstration project that sets a new standard for future smart grid deployments. Having a 100% uninterruptible power supply for a commercial facility is far from a unique requirement. Traditionally, meeting […]

Despite wind power’s going “mainstream,” original equipment manufacturers and end users struggle to pin down quality standards for ever-evolving wind turbine component technologies. As more utilities embrace wind power, the U.S. wind turbine market has expanded tremendously over the years. It has proliferated into numerous facilities that specialize in the roughly 8,000 component parts that […]