Legal & Regulatory Contributor |
Implementing a National Renewable Electricity Standard
October 20, 2009
10:00 a.m. Central Standard Time
Schedule this Webinar with your team – No Travel Required!
$189 per site location!
• Speakers |
• How Does It Work? |
• What Equipment Do I Need? |
• Questions? |
Join POWER’s editorial staff and Legal and Regulatory contributor, Davis Wright Tremaine, to learn about a National Renewable Electricity Standard and how this could affect your business. The Obama Administration is pushing legislation that will have an impact on the energy industry. This program will address the key issues, timing, and responses that will benefit management and leaders in the power generation market.
Discussion Topics Include: |
Different RES provisions have been approved in 2009 by the House of Representatives and the Senate Energy Committee. The House bill requires 20% renewable electricity by 2020. Senate Energy has proposed a 15% renewables target by 2021. Some of the issues we will address in this discussion include:
- The likelihood of a federal RES becoming law and when.
- The prospect of RES as part of climate cap and trade or a narrower energy bill.
- Discussion of annual renewable percentage requirements.
- The range of technologies that will be eligible for RPS credit.
- How a federal RES would interact with state RESs already in place.
- The need to address existing state and regional differences.
- How national standards affect the "politics" of criteria for renewable standards.
- Ultimately, how much a federal RPS would change the status quo.
Hear from these experts: |
You and your entire team can take part in this unique conference brought to you by POWER magazine and Davis Wright Tremaine’s Energy Practice.
You can view it at your desk or gather around a speakerphone in a conference room – no travel required! Each registration comes with access to the archived version of the program and the materials for six months.
Don’t miss this exclusive Webinar on October 20, 2009. Register you and your team today!
How does the Webinar work? |
It’s easy and convenient! You just need RealPlayer or Windows Media Player installed on your computer. If you do not have either, please follow the instructions below to download and install them. Or if you prefer, a phone for the audio and an Internet connection to let you watch the slides and other information on the Web will suffice. No other downloads or special hardware – a dial-up connection will work fine.
- One (1) set of materials (you may make copies for all of the persons you invited to listen to the program);
- One (1) toll-free connection to the seminar (if you select the audio connection), and
- One (1) Internet connection to the seminar.
- Use speakers on your computer or speakerphone on your telephone and invite your entire staff to attend for FREE!
What equipment do I need? |
For the audio connection:
- A computer with RealPlayer or Windows Media Player installed. When you log into the Virtual Seminar, your computer will be taken through a brief configuration check and will let you know if you’re missing any software.
For the Internet connection:
- PC: 166Mhz Pentium-based PC or better
- Operating system: Windows 95, 98, NT, 2000, XP
- Browser: For optimal viewing experience, we recommend using Internet Explorer 6.0 or higher. However, any version of IE 4.0 or higher will work. For Netscape, only versions 4.x are supported at this time.
- Internet connection: 28.8 or faster connection
- Display set at 1024 x 768 or 800 x 600
Player Downloads
- If using Microsoft Windows Media Player, Version 6.4 or later is required.
Download a supported Microsoft Windows Media Player - If using RealPlayer, Version 7.0 or later is required.
- Download a supported RealPlayer
If you are having any technical difficulties or need assistance meeting these requirements, please contact our Technical Support Center at 866-709-8255 or click here.
Questions? |
If you are having any technical difficulties or need assistance meeting these requirements, please contact our Technical Support Center at 866-709-8255 or click here. For content questions regarding this Webinar, contact Brian Nessen at [email protected].
var joeexample=new switchcontent("switchgroup2", "p") //Limit scanning of switch contents to just "p" elements joeexample.setStatus('[-] ', '[+] ') joeexample.setColor('#E5858C', '#C02833') joeexample.collapsePrevious(false) //Allow more than 1 content to be open simultanously joeexample.setPersist(false) joeexample.defaultExpanded() joeexample.init()
var joeexample=new switchcontent("switchgroup1", "div") //Limit scanning of switch contents to just "p" elements joeexample.setStatus('[-] ', '[+] ') joeexample.setColor('#E5858C', '#C02833') joeexample.collapsePrevious(false) //Allow more than 1 content to be open simultanously joeexample.setPersist(false) joeexample.defaultExpanded() joeexample.init()