O&M

Blades are probably the most delicate part of a wind turbine and the most susceptible to accidental damage. Some estimates suggest that greater than 90% of wind turbine blades are damaged to some degree while

If you’re still thinking of drones and robots as more toy than tool, think again. The drones now working in the power sector have gone far beyond remote-control hobbies and now resemble something closer to

Challenge:
After a major refurbishment, a Canadian nuclear plant required additional process and boiler feed water for plant start-up and commissioning.
The plant’s raw water supply contained measurements ranging from 1-10 NTU, conductivity from 70-100 and color units ranging from 180-420. The plant also experienced highly variable flow rates, ranging from 0-600 GPM, and issues with the

Challenge
A global polymer producer located in Ohio sought to improve the annual outage cleaning of its heat exchangers.
Historically, industrial cleaning contractors hand lanced the heat exchanger tubes, servicing four to six exchangers per night for two weeks to fit within the outage schedule. But often, multiple heat exchangers would require re-cleaning to allow for heat

MPW’s Bundle Blaster Side Cleaner system is designed to remotely clean the shell side of small to medium
sized tube bundles, up to 36 feet in length. The tube bundle is placed on hydraulically actuated rollers to
incrementally turn the bundle during the cleaning process while the cleaning head runs horizontally on a track
over the bundle. MPW’s

Steam turbines have to be warmed slowly to avoid excessive differential expansion of the various components, rotor stress, and potentially reduced service life. For that reason, startup times must be extended

There may be multiple closed-loop cooling systems at your power plant. Chances are good that they cool or control temperature on some very critical components. The two that are most likely to exist are the

Problem
A Florida pulp and paper mill faced a complicated, dangerous process to clean its power boiler during scheduled outages.
Previous efforts to clean the boiler included manual water blasting from scaffolding, which posed a safety risk to workers below due to the potential for falling debris.
Solution
The Operations team at MPW Industrial Services recommended that the facility’s

Case Study: MPW’s Automation Simplifies RO Replacement Process for Indiana Energy Plant

INDUSTRIAL WATERMPW’s emergency response pays off for Virginia Challenge:
When a Virginia power station had an issue with its existing Reverse Osmosis [RO] process, it called on MPW to supplement its water needs during an excessively cold winter.
The plant lost RO functionality at one of its four power-production units, which would severely damage its ability to