Drilling nears completion for the first large-scale carbon dioxide (CO₂) injection well in the U.S. for CO₂ sequestration, the Department of Energy (DOE) reported Tuesday. This project will be used to demonstrate that CO₂ emitted from industrial sources—such as coal-fired power plants—can be stored in deep geological formations to mitigate the release of large quantities of greenhouse gas emissions to the atmosphere.

Radioactive materials are clinging to the inside walls of reactor system components because of a noble metals injection process error some years ago at Cooper Nuclear Station (CNS). CNS has launched an aggressive, long-term program to remove the materials, but until the work is successfully completed, the station is also taking extensive measures to protect employees and reduce higher source term dose.

The expanded line of CoolPoint vortex shedding flowmeters introduced recently by Universal Flow Monitors Inc. is designed to ensure flow consistency in hydroelectric generators, heat exchangers, boiler feed pumps, steam turbines, natural gas humidification, and process cooling applications where water quality may be less than optimal. Additions to the product line include four larger sizes […]

Red Valve Company Inc. launched Series DX Slurry Knife Gate Valve, a durable and user-friendly gate valve that has been designed especially for heavy slurry applications in the power and mining industries. When the valve opens, the reinforced elastomer sleeves seal against each other and provide a 100% full port opening, minimizing turbulence, which in […]

Dickson’s new stainless steel case data loggers are designed to monitor up to 275F in wet conditions. The watertight instruments are made of stainless steel and are available in three models: HT 200 (the "Takes-the-Heat-Watertight" model) and piercing probe models HT 220 and HT 225. All models are available with user-replaceable one-year batteries and USB-enabled […]

Al Gore, in his recent New York Times op-ed titled "The Climate for Change," calls for a "$400 billion investment over ten years to construct a national smart grid to distribute renewable energy." Echelon supports these proposed investments. We also believe the answer is not just in constructing something new but in transforming the existing […]

The GRAPHLON GM 860 developed by Graphite Metallizing is an abrasion-resistant bushing material that protects pumps and helps prolong pump life. Designed for use in the manufacture of pump bushings and other critical-wear parts, the tough, polymer/graphite-based material was developed to replace traditional pump materials, which are prone to damage from highly abrasive suspensions. It […]

The conversion of liquefied natural gas (LNG) to pipeline-quality gas requires large quantities of low-grade thermal energy that may be available from industrial waste streams, steam power plants, or ocean water at the point of discharging LNG from the tanker. Alternatively, heat may be provided by the combustion of LNG or another fuel. In either case, the large temperature differences between these heat sources and the temperature of the LNG can be used to operate an engine that will offset or eliminate the pumping or fuel costs incurred.

House Democrats on Tuesday unveiled a 648-page discussion draft of the “American Clean Energy and Security Act of 2009,” a bill touted as a “comprehensive approach to America’s energy policy” because it seeks to establish, among other things, a carbon emissions reduction goal, a cap-and-trade program, and a federal renewable energy standard.

This year’s ELECTRIC POWER Exhibition will feature the latest technologies and services from approximately 500 companies. Get a preview of some of the exhibitor offerings here. For the entire offerings, you’ll have to visit the show floor in Chicago this May. (You’ll find all the event information here.)