 |
 |
| Dependable and Energy Efficient Direct Steam Injection Heaters |
The power industry demands reliable water heating equipment offering precise temperature control. Pick direct steam injection heaters satisfy both requirements. Pick's proven, robust design provides continuous service with minimal maintenance. Discharge temperature is held to extremely close tolerance - within 1°C or less - while providing rapid yet controlled response to changing process conditions.
Pick steam injection heaters provide 100% heat transfer efficiency - eliminating flash and heat losses inherent with indirect exchangers. All this, combined with an unlimited supply of hot water, the widest operating range of any steam injection heater, and low water pressure drop makes Pick Heaters the right choice.
Contact Pick at 262-338-1191. www.pickheaters.com |
|
 |
| 3000CS Chloride and Sulfate Analyzer |
Described by EPRI as a "promising new technology," the METTLER TOLEDO Thornton 3000CS at-line chloride and sulfate analyzer ensures real-time, ppb-level detection of chloride and sulfate ions in water cycle chemistry. The 3000CS uses microfluidic capillary electrophoresis, an ion separation technology, to accurately measure trace levels of chloride and sulfate. It is an effective alternative to costly off-line technologies such as ion chromatography and inductively coupled plasma. Unlike substitute measurements such as cation conductivity, it is not affected by formate, acetate or other contaminants. The 3000CS catches contamination quickly to prevent corrosion and meet turbine warranty requirements.
www.mt.com/3000CS |
|
 |
| Goodway Gives You Powerful Pickup With Extreme Safety |
| The Goodway DV-AV-EP dry hazardous area vacuum is ideal for recovery of fine powders in hazardous locations, like coal dust, flammable dust, and other combustible powders. It is certified for use in hazardous locations. Class I, Groups A, B, C & D, Division 2 Class II, Groups F & G, Division 2. For added safety, this model is powered by compressed air and comes equipped with a non-sparking, stainless steel tank, and an anti-static 1-micron pocket filter. This state-of-the-art unit can be used safely in areas where the use of an electric vacuum would pose a risk of explosion.
www.goodway.com - 888-364-7745
|
|
 |
| Molded PTFE Expansion Joints |
| The Proco Series 440 Molded PTFE Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. Wherever metallic joints, lap joints, or PTFE and FEP-lined rubber expansion joints were previously used, the Proco Series 440 can also be used. These PTFE joints are available in 2, 3 and 5 convolutions. Each convolution profile offers different overall lengths, movements and pressure/temperature ratings to fit the required specification. For more information, please visit the Proco Products, Inc. website.
www.procoproducts.com - 800-344-3246
|
|
|
|