Press Release

Siemens launches three new wind turbines based on one onshore direct drive platform

 

Extended portfolio for low wind, medium wind, and noise sensitive sites
Short time-to-market

Siemens has launched an extended portfolio of its successful Onshore direct drive wind turbines. At the WindEnergy Hamburg trade show, the company’s Onshore CEO Thomas Richterich launched three new turbine models for optimum performance at low wind, medium wind, and noise sensitive sites. Thanks to a modular platform concept, all three machines share the same nacelle design. Different controller settings and rotor diameters allow the new turbines to adapt to specific wind and site conditions. As the second generation of onshore direct drive technology was introduced two years ago with the Siemens SWT-3.3-130, all new models benefit from a short time-to-market. The new low noise turbine – the SWT-3.3-130LN – and the new medium wind speed turbine – the SWT-3.6-130 – will go into serial production in early 2017. The low wind speed turbine – the SWT-3.15-142 – will follow in late 2017.

“Our new wind turbine portfolio is the result of an intelligent platform strategy that allows maximum flexibility,” said Thomas Richterich, CEO Onshore of the Siemens Wind Power and Renewables Division. “Our customers benefit not only from benchmark setting performance in different wind classes, but also from the adaptability of our technology that meets nearly every site-, grid- and project specific requirement. Thanks to digitalization, these turbines are open for further optimization and individualization.”

The SWT-3.3-130LN wind turbine is a low noise version of the SWT-3.3-130 with reduced rotor speed and improved aerodynamics. It is based on proven Siemens direct drive technology, and allows operation with a 104.9 db noise level at a wind speed of 6 m/s. The B63 blades of the SWT-3.3-130LN include new aerodynamic add-ons for optimized performance. In addition to the vortex generators applied on the blade backs, the trailing edges are equipped with Siemens DinoTails Next Generation.

Thanks to an uprated generator, the new SWT-3.6-130 is able to harvest an annual energy output (AEP) of up to 17 gigawatt hours (GWh) at 8.5 m/s. At the same wind speeds compared to the SWT-3.3-130 launched in 2014, this represents an improved AEP rating of 6 percent. With its high performance at IEC II sites, the SWT-3.6-130 sets a competitive benchmark for wind turbines designed to harvest maximum power outputs in environments with moderate wind conditions.

The new SWT-3.15-142 is the first Siemens Direct-Drive wind turbine dedicated for IEC Class III. It’s B69 rotor-blades are based on hybrid-carbon technology by LM Wind Power. With a rotor-diameter of 142 meters and tower configurations that allow hub heights up to 165 meters, new standards for annual energy yields are set: Even at wind speeds of only six meters per second, the machine harvests ten gigawatt hours of energy per year.

This press release, a press picture and further material is available at:
www.siemens.com/press/PR2016090422WPEN

For further information on Siemens’ presented innovations at WindEnergy Hamburg, please see:
www.siemens.com/press/WindEnergy2016
For further information on Wind Power and Renewables Division, please see: www.siemens.com/wind
For further information on WindEnergy Hamburg trade show, please see:
www.siemens.com/weh
Contact for journalists:
Bernd Eilitz
Phone: +49 40 2889-8842; E-mail: [email protected]

Follow us on Twitter at: www.twitter.com/siemens_press

Siemens AG (Berlin and Munich) is a global technology powerhouse that has stood for engineering excellence, innovation, quality, reliability and internationality for more than 165 years. The company is active in more than 200 countries, focusing on the areas of electrification, automation and digitalization. One of the world’s largest producers of energy-efficient, resource-saving technologies, Siemens is No. 1 in offshore wind turbine construction, a leading supplier of gas and steam turbines for power generation, a major provider of power transmission solutions and a pioneer in infrastructure solutions as well as automation, drive and software solutions for industry. The company is also a leading provider of medical imaging equipment – such as computed tomography and magnetic resonance imaging systems – and a leader in laboratory diagnostics as well as clinical IT. In fiscal 2015, which ended on September 30, 2015, Siemens generated revenue of €75.6 billion and net income of €7.4 billion. At the end of September 2015, the company had around 348,000 employees worldwide. Further information is available on the Internet at www.siemens.com.
Siemens AG
Communications
Head: Clarissa Haller
Wittelsbacherplatz 2
80333 Munich
Germany

Reference number: PR2016090422WPEN

Siemens Aktiengesellschaft: Chairman of the Supervisory Board: Gerhard Cromme; Managing Board: Joe Kaeser, Chairman, President and Chief Executive Officer; Roland Busch, Lisa Davis, Klaus Helmrich, Janina Kugel, Siegfried Russwurm, Ralf P. Thomas; Registered offices: Berlin and Munich, Germany; Commercial registries: Berlin Charlottenburg, HRB 12300, Munich, HRB 6684; WEEE-Reg.-No. DE 23691322
Should you no longer wish to receive press releases from us, wish to receive our e-mails in a different version (Text or HTML), or should your contact details have changed, please let us know.

We regret that Siemens cannot be held responsible for any damage resulting from unauthorized changes to the content of this message or its attachments or from erroneous transmission.